Wiring Help!!

Discussion in 'Computing, Science, and Technology' started by rugertyler, Aug 29, 2010.

  1. rugertyler

    rugertyler Member

    Joined:
    Jun 26, 2010
    Messages:
    667
    Likes Received:
    3
    Device:
    iPhone 4S (Black)
    Ok, I'm not so great at wiring and I was wondering if some of you could help me...

    Here is a picture of what I'm dealing with - http://s977.photobucket.com/albums/ae252/rugertyler/?action=view&current=SDC10913.jpg

    As you can see in the picture, I have a laser (I want) and two red and blue flashing LED's (I don't want). What I want to do is cut the two wires going to the LED's. What I want to know is if I cut those two wires, will the laser and everything else still work correctly?

    Thank you for your help!
  2. ThatGEEKFreak

    ThatGEEKFreak Active Member

    Joined:
    Dec 20, 2007
    Messages:
    1,324
    Likes Received:
    10
    Device:
    iPad 3
    It should work perfectly, nothing stopping it as long as the laser has it's own circuit. Cutting the wire to the LED's and their circuit board is just cutting off the parallel circuit, if it was in series there would be a a problem, but it's not so your good to cut the wires to the LED and their circuit board off.
  3. rugertyler

    rugertyler Member

    Joined:
    Jun 26, 2010
    Messages:
    667
    Likes Received:
    3
    Device:
    iPhone 4S (Black)
    It worked perfect!! Thank you so much ThatGEEKFreak!

Share This Page