Winpwn 2.0.0.3 ipswBuild failure

Discussion in 'iPod touch Firmware 2.X Jailbreak' started by MrRBlack, Jul 25, 2008.

  1. MrRBlack

    MrRBlack New Member

    Joined:
    Jul 9, 2008
    Messages:
    23
    Likes Received:
    0
    Device:
    iPod touch
    Im getting ipswBuild failure over and over.

    Tried different firmwares all same. What gives?

    Please Register or Log in to view images

  2. kingslaye505

    kingslaye505 New Member

    Joined:
    Jan 2, 2008
    Messages:
    57
    Likes Received:
    0
    Make sure that you have your iPod plugged in and that all iTunes processes are closed. Try restarting your computer as well. If you are using custom images, try doing a build without them first, and if that works try it with the images. I had the same problem and doing this fixed it.
  3. MrRBlack

    MrRBlack New Member

    Joined:
    Jul 9, 2008
    Messages:
    23
    Likes Received:
    0
    Device:
    iPod touch
    Now it just quits.

    Still no jailbreaking.

    Please Register or Log in to view images



    It gets to the end of building and quits. I tired ipwner and samething.

    2.0.0.3 still loaded with problems!
  4. JonTheAzn

    JonTheAzn Member

    Joined:
    Jun 5, 2008
    Messages:
    174
    Likes Received:
    0
    Device:
    iPod touch
    Try using xWinPwn 0.3, maybe you'll be more successful with that
  5. kiko

    kiko New Member

    Joined:
    Dec 15, 2007
    Messages:
    110
    Likes Received:
    0
    Failed to create custom firmware but , worked to load another custom firmware.
    The only that i don't like is the pineapple in my ipod.
  6. MrRBlack

    MrRBlack New Member

    Joined:
    Jul 9, 2008
    Messages:
    23
    Likes Received:
    0
    Device:
    iPod touch
    Well after a few tries and without custom boot images It worked.

    But now when I restore the ipod I get unknown error 6??

    ARR!
  7. MoubsTheMuffin

    MoubsTheMuffin New Member

    Joined:
    Jan 25, 2008
    Messages:
    68
    Likes Received:
    0
    Error 6 is from putting ur ipot in restore mode instead of DFU...y
    Try putting it on DFU mode 1st then try restoring to custom firmware 2.0
  8. MrRBlack

    MrRBlack New Member

    Joined:
    Jul 9, 2008
    Messages:
    23
    Likes Received:
    0
    Device:
    iPod touch
    I have done this 3 times, no go, same error.
  9. MoubsTheMuffin

    MoubsTheMuffin New Member

    Joined:
    Jan 25, 2008
    Messages:
    68
    Likes Received:
    0
    are u sure? Cuz I had the same problem as u and I thout it was in DFU mode but it was in recovery mode..
  10. MrRBlack

    MrRBlack New Member

    Joined:
    Jul 9, 2008
    Messages:
    23
    Likes Received:
    0
    Device:
    iPod touch
    Well now I tried to do DFU again but its stuck on the USB cable image. I cant seem to do anything else with it. Wont boot to normal ipod.

    I cant restore with custum firmware, should I tried normal restore and then DFU mode again?

Share This Page