Tried J/B 3g touch 3.1.2 now stuck

Discussion in 'iPod touch' started by siber_pir8, Mar 9, 2010.

  1. siber_pir8

    siber_pir8 New Member

    Joined:
    Mar 9, 2010
    Messages:
    4
    Likes Received:
    0
    Device:
    3G iPod touch
    Sorry guys if this has been answered 1000s time before tried searching but couldnt find anything that helps.
    I tried J/B my 3g touch running 3.1.2 and it froze half way through balckrain, tried running again but stuck on the usb+itune screen. Tried restoring to 3.1.3 in recovery and dfu mode but keep getting 1601 error. not sure what to do now its stuck with a white page.
    Can any one shed any light?
    Thanks guys
  2. siber_pir8

    siber_pir8 New Member

    Joined:
    Mar 9, 2010
    Messages:
    4
    Likes Received:
    0
    Device:
    3G iPod touch
    Ok so i know the difference between dfu and restore, and i decided enough is enough and just upgrade to 3.1.3. But when in recovery mode I click restore in itunes and it says verifiying with apple and makes the screen white on ipod. Then i hear it sounds like it disconnects from usb with it still varifies it.
    Then shortly after it fails due to a 1601 error.
    Ive tried in restore and dfu mode and get the same.
    Also in recovery mode the add new hardware always pops up
    Any ideas guys?
  3. SpeedyApocalypse

    SpeedyApocalypse Member

    Joined:
    Dec 27, 2009
    Messages:
    564
    Likes Received:
    13
    Device:
    4G iPod touch
    Try Ih8sn0w iReb?

Share This Page