SSH Not Working? Look Here.

Discussion in 'iPod touch Firmware 1.1.3 Discussions' started by NUCLEaR, Jan 26, 2008.

  1. NUCLEaR

    NUCLEaR New Member

    Joined:
    Jan 12, 2008
    Messages:
    167
    Likes Received:
    1
    Device:
    2G iPod touch
    Some people are having trouble connecting to their iPods using SSH.
    Some still don't have that problem resolved.

    "PL0X HELP!"

    Well, if you searched around, and looked for some solutions, tried them, and failed, no worries!
    For file transfers, use iPhoneBrowser. Google. For the commands,

    SSH is basically terminal on your computer, so...
    Use Installer to install the "Term-vt100" application under the "System" category.
    Make sure you also have BSD Subsystem installed, or Terminal will be limited in what it can do.

    Once that's done, start up Term-vt100 and use the keyboard to enter whatever command you need to enter. Then press return, and it should work!

    Known Problems?
    1) Backspace doesn't seem to work. I said seems. It works, only it goes forward instead of backwards. So if you typed in "hello", backspacing once will erase the "o", but the cursor will move forward. Don't be confused by this.

    ~NUCLEaR
  2. kabirdasji

    kabirdasji New Member

    Joined:
    Jan 13, 2008
    Messages:
    73
    Likes Received:
    0
    can u tell me how this is going to work cause i installed term-vt100
    but how do i use iphonebrowser i searched it on googel
    click the first one but nothign is there

    so can u tell me what i have to type in on the term vt-100 program
  3. NUCLEaR

    NUCLEaR New Member

    Joined:
    Jan 12, 2008
    Messages:
    167
    Likes Received:
    1
    Device:
    2G iPod touch

Share This Page