SiP-VoiP [Full Guide]

Discussion in 'iPod touch VoIP and Telephony' started by F0N3Y, Jan 1, 2008.

  1. F0N3Y

    F0N3Y New Member

    Joined:
    Nov 4, 2007
    Messages:
    410
    Likes Received:
    3

    Please Register or Log in to view images



    Please Register or Log in to view images



    Table of content:
    I. Preparation
    II. Installation
    III. Set Up
    IV. Customize
    V. Call

    I. Preparation
    ________________________________

    Let's all begin by getting prepared. By now you should have your iPod Touch or Iphone Jailbroken. If you don't have your device Jailbroken you must do so.
    It's time to add the Official TouchMods.net Repo.
    Put this in your Sources:
    http://touchmods.net/rep.xml
    After you have added this. Refresh Installer!

    II. Installation
    ________________________________
    The installation process is pretty straight forward. All you have to do is press a couple of buttons. Lets begin. Open up installer, let it refresh sources then go to recent packages. Ok now you should be at recent packages. You Should see "Touchmods SIP-VoiP" Install this. After Installation restart your iPod Touch / iPhone.

    III. Set Up
    ________________________________

    The set up may different for all users, it all depends on their service. So you can look at this thread for a major list of service providers.
    Ok after you created an account at a service provider we can now continue.

    Please Register or Log in to view images



    Set it up. To set your account up you will need the fallowing:
    • Username:
    • Password:
    • Registrar:
    After You have set this up you can hit save.
    If you still need helping finding your Registrar look at this thread

    IV. Customize
    ________________________________
    Probably the funnest part of this whole process. Customizing this application. There is many themes you can download. You can download this pack with over 10 Skins/Themes for free. Thanks to www.ipodtouchtutorials.com
    Yup, now you have a better looking "SIP-VoiP" Application.

    V. Lets Call NOW!
    ________________________________

    Yup your near completion. Insert you destination phone #.
    This format will be the one we will use. Inside the (USA)
    1-719-330-####

    Ok. The first number is always 1. Now the next 3 numbers is the area code. For me its 719 (Colorado Springs, Colorado) Right Next to the Area code goes the number.
    Easy as that!

    Call some one, Prank Call some one, be you.

    Have Fun.

    __________________________________________

    Have a question or a comment? Drop me or one of the fallowing people a comment. They will gladly help you!
    This list is for the knowledge that people have about this application. If you would like to be on this list, contact me. However you must know how to handle and use the program. Do you think you can make this guide better? PM me as well.

    Put this in your sig:

    Please Register or Log in to view images



    HTML:
    [IMG]http://i182.photobucket.com/albums/x278/F0N3Y/SigForThread.gif[/IMG]


    List:
    • F0N3Y

    _____________________________________________

    Made possible by IPTT
  2. kenney69

    kenney69 New Member

    Joined:
    Dec 14, 2007
    Messages:
    108
    Likes Received:
    0
    Beat you to it. Mine's already stickied. You have your fancy images though =/
  3. thebusdriver

    thebusdriver New Member

    Joined:
    Nov 11, 2007
    Messages:
    128
    Likes Received:
    1
    I wouldnt be suprised if they switched to this one though. Yours is good, but this one is much more noob proof. (not like its hard to begin with though

    Please Register or Log in to view images

    )
  4. bgizzle

    bgizzle Administrator Staff Member

    Joined:
    Sep 13, 2007
    Messages:
    5,100
    Likes Received:
    543
    Device:
    iPhone 6
    1 person likes this.
  5. bugmenot1

    bugmenot1 Banned

    Joined:
    Nov 7, 2007
    Messages:
    140
    Likes Received:
    0

    thanks for sticking my thread

    Please Register or Log in to view images

  6. darkeru

    darkeru New Member

    Joined:
    Dec 14, 2007
    Messages:
    14
    Likes Received:
    0
    hey great guide man, but wen i try making a call from the ipot nothing happens, calls work from my pc but not on ipot. any idea?

    im using voipraider if thats any help
  7. thebusdriver

    thebusdriver New Member

    Joined:
    Nov 11, 2007
    Messages:
    128
    Likes Received:
    1
    Check you password and username, they are case sensitive. The iPot automatically capitalizes the first letter of your password. This was my problem for a while until i figured out what was going on.
  8. darkeru

    darkeru New Member

    Joined:
    Dec 14, 2007
    Messages:
    14
    Likes Received:
    0
    well the voip program shows that i have signed on from another computer so i know my info is good. still wont call, oh well i'll keep messin with it
  9. ipodtouchmaster05

    ipodtouchmaster05 Well-Known Member

    Joined:
    Sep 30, 2007
    Messages:
    1,787
    Likes Received:
    41
    Device:
    iPhone 5 (Black)
    What about a mic for it? where can we get those?
  10. F0N3Y

    F0N3Y New Member

    Joined:
    Nov 4, 2007
    Messages:
    410
    Likes Received:
    3
    I actually just tried that service and It wasnt working. Try Restarting your device after you edit or add new information. Try voipbuster i used it and it worked.

    to iPodTouchMaster05

    you can preorder http://touchmods.net/touchmods/preorder/ your mic, or you can make your own

    Did you miss type any of the inputs? that might be your problem. That was my problem for a bit, which caused it to not be able to make a call.

Share This Page