quickpwn able to jailbreak my ipod touch 2G 3.0?

Discussion in 'iPod touch 2G Jailbreak: redsn0w, 24kpwn, etc.' started by chikebum, Jun 18, 2009.

  1. chikebum

    chikebum New Member

    Joined:
    Jan 31, 2009
    Messages:
    22
    Likes Received:
    0
    Device:
    iPhone 3G (Black)
    as quote :

    chickenalfredo: You need 8.2 to use the new syncing features in 3.0. Redtool/redsn0w for the 2G iPod Touch has been implemented into QuickPwn, which will be release tomorrow and will work with 8.2. All App Store apps will work after the upgrade, but you will have to reinstall all of your JB apps. Some will not work; most do.

    so....quickpwn able to jailbreak my ipod touch 2G 3.0 ?
  2. iamkewl

    iamkewl Banned

    Joined:
    Nov 9, 2008
    Messages:
    1,924
    Likes Received:
    0
  3. Bi0hAzArD

    Bi0hAzArD Member

    Joined:
    Dec 9, 2008
    Messages:
    289
    Likes Received:
    0
    not until a jailbreak for 3.0 is released. (tomorrow)
  4. chikebum

    chikebum New Member

    Joined:
    Jan 31, 2009
    Messages:
    22
    Likes Received:
    0
    Device:
    iPhone 3G (Black)
    ic....ultrasn0w ? works with ipod touch 2g 3.0 too ?
  5. jdelah

    jdelah New Member

    Joined:
    Aug 30, 2008
    Messages:
    28
    Likes Received:
    0
    Device:
    2G iPod touch
    ultrasn0w is the software unlock for iPhone 3G and hopefully iPhone 3G
  6. dudeofswim

    dudeofswim New Member

    Joined:
    Feb 19, 2009
    Messages:
    107
    Likes Received:
    0
    Device:
    2G iPod touch
    trois, drei, три, három!

    This is the low down on our tools for use with the 3.0 firmware from Apple, read the whole post in full before attempting anything. Because of some bugs and unexpected changes this will be a multipart release, starting with the release of PwnageTool for Mac OS X. QuickPwn for Mac OS X and Windows will follow sometime soon, please don’t bug us about it, we are working flat out to get everything finished to release them.

    1. GOLDEN RULE: If you are using a 3G iPhone with yellowsn0w and rely on yellowsn0w to obtain cellular service, then you should NOT use PwnageTool right now. UltraSn0w is not included with this release and therefore your baseband will be locked and unable to use an operator other than the official one it was bought for. UltraSn0w will be release via APT (cydia and icy) soon. If you have an original iPhone (1st generation) then 3.0 unlock works with this PwnageTool release.
    2. Yellowsn0w in its current form will NOT work with the baseband version that is present in the 3.0 update, you will need Ultrasn0w, which will be released sometime soon, Ultrasn0w will work with all iPhone 3G models (but not 3GS), even ones that were previously unlockable, Ultrasn0w (when available) will be released via APT (this means you can get it via Cydia or Icy).
    3. Please read all parts of this post before downloading and using these tools.
    4. Read items 1, 2 and 3 again and again.
    5. At the bottom of this post are the bit******* files for the 3.0 capable version of PwnageTool.
    6. This app is suitable for the recent 3.0 release.
    7. PwnageTool will NOT work for the iPhone 3GS.
    8. PwnageTool WILL work for Original iPhone (1st Generation), Original iPod touch (1st Generation) and the iPhone 3G.

    Baseband 101

    The ‘baseband’ is the generic nickname given to the internal components of the iPhone that handle the phone calls and Internet access. This ‘baseband’ is a tiny and unique independent computer system that runs inside your iPhone, it is separate to the main system that handles the applications (such as email and google maps) and it talks to the main part of the phone over an internal communications network. Think of it like a cable modem or other peripheral that is attached to your home PC that needs occasional updates. When a software update is released and presented to you within iTunes the baseband is sometimes updated (to fix bugs or add new features). The 3.0 update for the iPhone 3G contains such an update, so running the vanilla updater straight away with iTunes will reprogram and update the baseband.

    SIM Free/SP Unlocked/Factory Unlocked iPhone 3G

    This applies if you bought your iPhone 3G for $$$$$$$. This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked) and you are able to put any SIM card into the phone and get service. Your phone is already unlocked so you do not need to worry about baseband updates, simply upgrade to 3.0 using iTunes and then use PwnageTool to create an ipsw and then use this to jailbreak your phone.

    iPhone 2G (1st Generation)

    Update or Restore your iPhone 2G with iTunes then use PwnageTool to do the magic, ‘nuff said, you don’t need to worry about anything, the baseband will be unlocked, the phone jailbroken.

    iPod Touch 1G (Original iPod Touch)

    Update to 3.0 with iTunes and use PwnageTool.

    iPod Touch 2G (New iPod Touch)

    Sorry, no support at this time within PwnageTool, use Redsn0w instead.


    Official Bit******* Releases -

    * http://*******s.[PIRACY.tb].org/4963802/ SHA1 = 2e19d39398233f88ae0782fd82462a9223791f7f
    ------------------double post merged------------------
    trois, drei, три, három!

    This is the low down on our tools for use with the 3.0 firmware from Apple, read the whole post in full before attempting anything. Because of some bugs and unexpected changes this will be a multipart release, starting with the release of PwnageTool for Mac OS X. QuickPwn for Mac OS X and Windows will follow sometime soon, please don’t bug us about it, we are working flat out to get everything finished to release them.

    1. GOLDEN RULE: If you are using a 3G iPhone with yellowsn0w and rely on yellowsn0w to obtain cellular service, then you should NOT use PwnageTool right now. UltraSn0w is not included with this release and therefore your baseband will be locked and unable to use an operator other than the official one it was bought for. UltraSn0w will be release via APT (cydia and icy) soon. If you have an original iPhone (1st generation) then 3.0 unlock works with this PwnageTool release.
    2. Yellowsn0w in its current form will NOT work with the baseband version that is present in the 3.0 update, you will need Ultrasn0w, which will be released sometime soon, Ultrasn0w will work with all iPhone 3G models (but not 3GS), even ones that were previously unlockable, Ultrasn0w (when available) will be released via APT (this means you can get it via Cydia or Icy).
    3. Please read all parts of this post before downloading and using these tools.
    4. Read items 1, 2 and 3 again and again.
    5. At the bottom of this post are the bit******* files for the 3.0 capable version of PwnageTool.
    6. This app is suitable for the recent 3.0 release.
    7. PwnageTool will NOT work for the iPhone 3GS.
    8. PwnageTool WILL work for Original iPhone (1st Generation), Original iPod touch (1st Generation) and the iPhone 3G.

    Baseband 101

    The ‘baseband’ is the generic nickname given to the internal components of the iPhone that handle the phone calls and Internet access. This ‘baseband’ is a tiny and unique independent computer system that runs inside your iPhone, it is separate to the main system that handles the applications (such as email and google maps) and it talks to the main part of the phone over an internal communications network. Think of it like a cable modem or other peripheral that is attached to your home PC that needs occasional updates. When a software update is released and presented to you within iTunes the baseband is sometimes updated (to fix bugs or add new features). The 3.0 update for the iPhone 3G contains such an update, so running the vanilla updater straight away with iTunes will reprogram and update the baseband.

    SIM Free/SP Unlocked/Factory Unlocked iPhone 3G

    This applies if you bought your iPhone 3G for $$$$$$$. This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked) and you are able to put any SIM card into the phone and get service. Your phone is already unlocked so you do not need to worry about baseband updates, simply upgrade to 3.0 using iTunes and then use PwnageTool to create an ipsw and then use this to jailbreak your phone.

    iPhone 2G (1st Generation)

    Update or Restore your iPhone 2G with iTunes then use PwnageTool to do the magic, ‘nuff said, you don’t need to worry about anything, the baseband will be unlocked, the phone jailbroken.

    iPod Touch 1G (Original iPod Touch)

    Update to 3.0 with iTunes and use PwnageTool.

    iPod Touch 2G (New iPod Touch)

    Sorry, no support at this time within PwnageTool, use Redsn0w instead.


    Official Bit******* Releases -

    * http://*******s.[PIRACY.tb].org/4963802/ SHA1 = 2e19d39398233f88ae0782fd82462a9223791f7f
  7. YodaEXE

    YodaEXE New Member

    Joined:
    Sep 13, 2008
    Messages:
    3
    Likes Received:
    0
    Device:
    2G iPod touch
    Too bad Redsn0w doesn't seem to have been updated to work with 3.0 yet. They shouldn't say to use Redsn0w WHEN IT DOESN'T WORK.
  8. m00t

    m00t Banned

    Joined:
    Jun 12, 2009
    Messages:
    59
    Likes Received:
    0
    Which probably is foreshadowing that an update to redsn0w is imminent.

    Please Register or Log in to view images

  9. Touchtacular

    Touchtacular New Member

    Joined:
    Jan 16, 2009
    Messages:
    492
    Likes Received:
    0
    Device:
    2G iPod touch
    Would we be able to hash together a working redsn0w using the Quickpwn *******? They phrase it like it's possible.
  10. dudeofswim

    dudeofswim New Member

    Joined:
    Feb 19, 2009
    Messages:
    107
    Likes Received:
    0
    Device:
    2G iPod touch
    Yeah. Can't wait. redsn0w = who should we contact for updates?

Share This Page