Please Help Me!!!!!!!!!!!

Discussion in 'iPod touch Firmware 2.X Jailbreak' started by akkkmed, Aug 20, 2008.

  1. akkkmed

    akkkmed New Member

    Joined:
    Apr 27, 2008
    Messages:
    26
    Likes Received:
    0
    I am trying to PWN my iPod Touch using Windows.
    I keep getting the dreaded (error 6) in iTunes.
    PLEASE HELP ME!!!!!
    I want to get this finished tonight.
    THANK YOU!!!
  2. Gitykins

    Gitykins Banned

    Joined:
    May 16, 2008
    Messages:
    3,760
    Likes Received:
    1
    You're not in DFU. Plug in the iPod, turn it off, and let it sit for 5 seconds. Then, hold the home and power buttons for ten seconds, and release the power button and hold the home button until the iPod pops up in iTunes and it says it's in recovery mode.

    To test if it's in DFU, after doing the above steps, hold the power button and try to turn it on. If the screen stays black, then you are in DFU.
  3. RenegadeKrogan

    RenegadeKrogan Banned

    Joined:
    Jul 16, 2008
    Messages:
    1,744
    Likes Received:
    0
    Are you in DFU mode?

    1. Turn on the ipod touch.

    2. Plug it in.

    3. Hold the home and power button for about 11 seconds or until it shuts off.

    4. Exactly 2 seconds later let go of the power button and continue holding the home button for about 35 seconds.

    5. Computer will recognize it and you can now restore.

    Also make sure you are updated in itunes.

    If the DFU mode does not work then change the USB drive and try again.
  4. akkkmed

    akkkmed New Member

    Joined:
    Apr 27, 2008
    Messages:
    26
    Likes Received:
    0
    Ok, I'm trying AGAIN. I've already followed what you guys said, but it failed again.
    Is it normal for the iPod screen to go gray-ish/white during the process?
  5. Gitykins

    Gitykins Banned

    Joined:
    May 16, 2008
    Messages:
    3,760
    Likes Received:
    1
    Yes. The screen should not change colors after you turn it off and start doing the button combinations.
  6. akkkmed

    akkkmed New Member

    Joined:
    Apr 27, 2008
    Messages:
    26
    Likes Received:
    0
    It seems like it keeps failing on the "Preparing iPod Software" step.
    When it finishes "Preparing iPod", the white spinning circle happens, and it says "Preparing iPod Software" in iTunes.

    HELP!!!!
    ------------------double post merged------------------
    Should I try to PWN it again or something?
  7. ipodgamez

    ipodgamez Active Member

    Joined:
    Oct 2, 2007
    Messages:
    504
    Likes Received:
    51
    Device:
    5G iPod touch
    are you using my thread to jb your ipod (its the first link in my sig)
  8. akkkmed

    akkkmed New Member

    Joined:
    Apr 27, 2008
    Messages:
    26
    Likes Received:
    0
    Haha, yeah, I am. Thanks by the way. I didn't realize it was your thread.
    Advice on my problem?
  9. ipodgamez

    ipodgamez Active Member

    Joined:
    Oct 2, 2007
    Messages:
    504
    Likes Received:
    51
    Device:
    5G iPod touch
    yupp your not in dfu mode

    YOU MUST DO THIS EXACTLYYY

    Ope itunes and get a stopwatch or a watch with a seconds hand and follow these directions to a T.
    1. ***TURN THE VOLUME ON YOUR COMPUTER UP***
    2. Hold Power Button and turn off device
    3. Wait 5 seconds
    4. Hold Power + Home Button For 10 seconds EXACTLY
    5. Let go of power button but keep pressing the home button for 10 seconds EXACTLY
    6. When you hear the magical sound in itunes that your device is connected then and only then are you OFFICIALLY in DFU mode. Also make sure Your iPod doesn't show ANYTHING on the screen after step 1. If it shows the connect to itunes sign you did it wrong so just try again till you get it right.
  10. amarellapudi

    amarellapudi New Member

    Joined:
    Mar 11, 2008
    Messages:
    46
    Likes Received:
    0
    Device:
    2G iPod touch
    if you have another computer use it. the computer u are using now might not have 2.0 usb ports.

Share This Page