Philips Surface Shields For iPod touch G2 DLA56345/97

Discussion in 'Accessories' started by barbiegirl2000, Mar 11, 2009.

  1. barbiegirl2000

    barbiegirl2000 New Member

    Joined:
    Mar 9, 2009
    Messages:
    50
    Likes Received:
    0
    Device:
    2G iPod touch
    I bought one of the Philips Surface Shields For iPod touch G2 yesterday from Kmart, Sydney. I tried putting the surface shields on, which were fine upon initial inspection, but after half an hour the shields began to peel off. Here is a photo of what I am talking about (http://img21.imageshack.us/my.php?image=photo147c.jpg)

    Did I do something wrong or are these shields just total crap? There are no instructions on the packet about how to appl them, so the first shield i tried putting on by simply sticking it on but that caused too many air bubbles. The second one I tried I used a spray bottle to spray some water on the inside of the shield as I researched on the internet, this was apparently the best way to apply them. I flattened it out, got the excess water out and then half an hour later it ends up like what you can see in the photo...
    ------------------double post merged------------------
    Are the covers just crap? has anyone tried them before?
    ------------------double post merged------------------
    anyone?
  2. Matt-09

    Matt-09 New Member

    Joined:
    Dec 31, 2008
    Messages:
    430
    Likes Received:
    0
    Device:
    2G iPod touch
    Might look better when all the water goes.
  3. quikx15

    quikx15 New Member

    Joined:
    Mar 13, 2009
    Messages:
    1
    Likes Received:
    0
    you should try the invisishield
  4. Wiizz

    Wiizz New Member

    Joined:
    Mar 4, 2009
    Messages:
    110
    Likes Received:
    0
    Does the water thing damage your iPod?

Share This Page