Openiboot issues

Discussion in 'Android Chat' started by mytouch386, May 29, 2010.

  1. mytouch386

    mytouch386 New Member

    Joined:
    Jan 3, 2008
    Messages:
    341
    Likes Received:
    0
    Device:
    iPad
    I am using shadowrivers "fresh" openiboot builds and am having an issue with my ipod touch 1g

    Code:
     jeremy@ubuntu:~$ cd ~/openiboot
    jeremy@ubuntu:~/openiboot$ cd openiboot
    jeremy@ubuntu:~/openiboot/openiboot$ sudo ./loadibec openiboot-ipod.img3
    sudo: ./loadibec: command not found
    jeremy@ubuntu:~/openiboot/openiboot$ sudo ./loadibec openiboot.img3
    sudo: ./loadibec: command not found
    jeremy@ubuntu:~/openiboot/openiboot$ cd ./openiboot.img3
    bash: cd: ./openiboot.img3: Not a directory
    jeremy@ubuntu:~/openiboot/openiboot$ cd ./loadibec openiboot.img3
    bash: cd: ./loadibec: No such file or directory
    jeremy@ubuntu:~/openiboot/openiboot$ ./loadibec openiboot.img3
    bash: ./loadibec: No such file or directory
    jeremy@ubuntu:~/openiboot/openiboot$ cleint/loadibec openiboot.img3
    bash: cleint/loadibec: No such file or directory
    jeremy@ubuntu:~/openiboot/openiboot$ sudo client/loadibec openiboot.img3
    jeremy@ubuntu:~/openiboot/openiboot$ sudo client/oibc
    jeremy@ubuntu:~/openiboot/openiboot$ sudo client/oibc
    Client connected: !<filename>[@<address>] to send a file, ~<filename>[@<address>]:<len> to receive a file
    ---------------------------------------------------------------------------------------------------------
    miu: epoch mismatch
    PLL 1: off.
    PLL 0: off.
    PLL 1: 412000000
    PLL 2: off.
    PLL 3: 108000000
    NOR vendor=bf, device=273f
    Successfully loaded bank1 nvram
    Successfully loaded bank2 nvram
    syrah_quiesce()
    otf clock divisor: 5
    fps set to: 59.976
    SFN: 0x10300, Addr: 0xfd00000, Size: 0x14001e0, hspan: 0x280, QLEN: 0xa0
    syrah_init() -- Hurray for displays
    Syrah Panel ID (0xb1d11b):
       Build:          UNKNOWN 
       Type:           SHARP 
       Project/Driver: N45/Novatek-6.x AutoBoot Enabled 
    Autoboot display...
    changing to continuous calibration mode 3
    syrah_init success!
    Installing gamma table 0x0000d110 / 0x0000ff70
    i2c: ack not received before register/command 0
    camera: unrecognized sensor model ID = 0xdead!
    menu: images loaded
    radio: comm board not present, powered on, or at+xdrv=10,2 had been issued.
    nand: Probing flash controller...
    nand: DEVICE: b614d5ec
    nand: BANKS_TOTAL: 8
    nand: BLOCKS_PER_BANK: 4096
    nand: SUBLKS_TOTAL: 4096
    nand: USER_SUBLKS_TOTAL: 3872
    nand: PAGES_PER_SUBLK: 1024
    nand: PAGES_PER_BANK: 524288
    nand: SECTORS_PER_PAGE: 8
    nand: BYTES_PER_SPARE: 128
    nand: BYTES_PER_PAGE: 4096
    nand: PAGES_PER_BLOCK: 128
    ftl: Found production format: 43303035
    ftl: Successfully found FTL context block: 1505
    ftl: Successfully read FTL context block. usnDec = 0xfffe5709
    ftl: Detected version 46560001 b9a9fffe
    ftl: FTL successfully opened!
    bdev: partition id: 0, type: af, sectors: 63 - 128063
    bdev: partition id: 1, type: af, sectors: 128079 - 3964905
    Loading kernel...
    Cannot find kernel.
    USB state change: 0 -> 0
    EP 0: 2
    EP 1: 2
    EP 2: 2
    EP 3: 2
    EP 4: 2
    EP 5: 2
    USB state change: 0 -> 1
    usb: reset detected
    USB state change: 1 -> 1
    usb: reset detected
    USB state change: 1 -> 1
    radio: comm board detected.
    USB state change: 1 -> 3
    USB state change: 3 -> 4
    
    I enter that and try typing things after that point but nothing happens any help?
    Preferably from shadowriver

    Please Register or Log in to view images



    LOL i wasted my whole day because i selected the wrong download

    Please Register or Log in to view images

  2. yousw2

    yousw2 New Member

    Joined:
    Jan 1, 2011
    Messages:
    16
    Likes Received:
    0
    Device:
    iPhone 3GS (Black)
    you just command install, that's all

Share This Page