Newly Jailbroken iPod Touch wont Start

Discussion in 'iPod touch Firmware 2.X Jailbreak' started by deathshadow391, Sep 26, 2008.

  1. deathshadow391

    deathshadow391 New Member

    Joined:
    Jan 29, 2008
    Messages:
    22
    Likes Received:
    0
    Device:
    iPod touch
    Hi, I recently tried to Jailbreak my iPod touch (Gen 1, Software 2.1) using QuickPwn. It registered the firmware and completed all of the steps, But when my iPod re-started it sat on the Apple logo screen for 2 hours. I've tried turning it on and off multiple times but nothing happens. Also, when I plug it into my computer iTunes Starts and freezes. Any help would be much appreciated!
  2. murphmanny

    murphmanny Banned

    Joined:
    Sep 19, 2007
    Messages:
    5,250
    Likes Received:
    3
    put the ipod in dfu mode
    then try it again
  3. Appstore 2.0

    Appstore 2.0 New Member

    Joined:
    Jul 4, 2008
    Messages:
    948
    Likes Received:
    0
    Before doing the following, make sure your iPod is not connected by usb

    1. Turn iPod off (hold home + sleep for 10 secs)

    2. Hold HOME, nothing else. Just home

    3. Connect your usb, keep holding home

    4. wait until the "please connect to iTunes" comes up

    5. Restore.

    ------------------------------------------------------------------------------------------------------------

    When you re-jailbreak make sure you hold HOME through the WHOLE process, you can only let go when quickpwn says "jailbreak complete" and the spinny wheel comes underneath the image of the ramdisk.

Share This Page