Major ziphone related problem........

Discussion in 'iPod touch Firmware 1.1.4 Discussions' started by MicroLzyD, Mar 17, 2008.

  1. MicroLzyD

    MicroLzyD New Member

    Joined:
    Nov 22, 2007
    Messages:
    49
    Likes Received:
    0
    ok, so i recently upgraded to 1.1.4 from 1.1.1 by using itunes
    Then, i used ziphone and clicked "Do it All"

    then in the middle of the thing.. i had to stop it, so, i did........ i clicked "stop process"

    now, my touch is in this.. "state"
    on my touch screen it says:
    "BSD root: md0, major 2, minor 0"

    and itunes won't recognize the touch when i connect it to the computer.....

    ANYTHING I CAN DO???
  2. kevin552

    kevin552 New Member

    Joined:
    Mar 15, 2008
    Messages:
    22
    Likes Received:
    0
    i had this problem....

    disconnect your usb cable from your ipod ( leave it in your computer )
    turn your ipod off
    press the home button untill the screen goes black
    plug in the usb cable
    *note* your ipod is gonna need to be restored to 1.1.4 and then you have to jailbreak it again
  3. MicroLzyD

    MicroLzyD New Member

    Joined:
    Nov 22, 2007
    Messages:
    49
    Likes Received:
    0
    the power button and the home button won't do a Thing

    i'm so sad..
  4. kevin552

    kevin552 New Member

    Joined:
    Mar 15, 2008
    Messages:
    22
    Likes Received:
    0
    its gonna be fine...i had this problem like 5 times

    disconnect your ipod from the usb cable and hold down the power button and the home button untill it powers off...then follow what i posted above
  5. hiflyer

    hiflyer Guest

    After you restore and setup as new. Run ziphone 2.6b and select ipod on the jailbreak. The Do it All is for the iphone. It will screw up you ipod.
  6. jimbeam

    jimbeam Active Member

    Joined:
    Nov 19, 2007
    Messages:
    3,694
    Likes Received:
    12
    Device:
    iPhone 3G (Black)
    DO IT ALL! as in jailbreak, unlock, activate. It is an ipod right? If so i think this is were you went wrong.

    Only the first thing applies to the Touch.
  7. hiflyer

    hiflyer Guest


    DO IT ALL - That is only for the iphone. Only use the ipod to jailbreak an ipod.
  8. MicroLzyD

    MicroLzyD New Member

    Joined:
    Nov 22, 2007
    Messages:
    49
    Likes Received:
    0
    ok, i got up to the, turn off then plug back in

    but, itunes still doesn't recognize the touch..
  9. kevin552

    kevin552 New Member

    Joined:
    Mar 15, 2008
    Messages:
    22
    Likes Received:
    0
    you have to :

    turn it off
    disconnect your ipod from the usb cable
    press the home button untill the screen turns on ( it will be a black screen )
    plug in your ipod to the usb cable and it will need to be restored
  10. MicroLzyD

    MicroLzyD New Member

    Joined:
    Nov 22, 2007
    Messages:
    49
    Likes Received:
    0
    o ok, Finally got it

    thanks a bunch

Share This Page