legitimate guide for unlocking and jailbreaking the iphone?

Discussion in 'iPhone' started by edisonho1990, Dec 5, 2007.

  1. edisonho1990

    edisonho1990 New Member

    Joined:
    Oct 27, 2007
    Messages:
    140
    Likes Received:
    0
    i've searched the interenet and there are way too many guides which tell u to do different things

    do u guys know a legitimate way to unlock the iphone to use any sim card? and to jailbreak it on version 1.1.1. and 1.1.2.?

    thanks
  2. ojx

    ojx Member

    Joined:
    Sep 27, 2007
    Messages:
    506
    Likes Received:
    0
    Device:
    iPhone 6 Plus
    I didn't write this, i dont take credit at all. Use at your own risk. this is the guide that helped me have 1.1.2 on my iphone. Good luck to all

    This guide is for windows platform

    *This will fully unlock iPhone ( 1.0.2 virgin or virginised and working 1.1.1) to work with any network with functional YouTube.
    *know issues for US iPhone users outside US http://code.google.com/p/iphone-elite/wiki/fix_crashing_phone_sms_apps
    DO NOT USE THIS IF YOU HAVE AN OTB 1.1.2
    *No Known issues for US iphone for US users.




    *This will not virginise or UnBrick you phone so start with a working virginised 1.0.2 or any working 1.1.1.
    *OF COURSE YOU NEED WI-FI.
    *this method was used on a US originally 1.1.1 OTB and 1.0.2 OTB. *This pre-guide is for EXPRIENCED users only, you should know how to use winSCP or FileZilla , and know how to move files fo and to iPhone brefor using this Guide .


    *it is best to have those files handy:

    - Firmware 1.0.2 and 1.1.1 and 1.1.2
    - iTunes 7.4 (7.5 didn’t work for me) "in pack"
    - iBrickr v0.91 "in pack"
    - iAsign "in pack"
    - anySIM 1.2u "in pack"
    - lockdownd 1_1_2 "in pack"
    - Filezilla sftp (winSCP didn’t work for me) "in pack"
    - WiNnstaller "in pack"
    - AppTappinsaller "in pack"
    - 1.1.2_jailbreak "in pack" download new version here http://conceitedsoftware.com/iphone/site/112jb.html

    Download pack http://[PIRACY.rs].com/files/69848230/1.1.2pack.zip


    - you will also need 2 sim cards one AT&T non-activated card and a T-Mobile sim card (or any Non-AT&T)

    Cycle

    * 1.1.1 or 1.0.2 ===> 1.1.2 ====> 1.0.2 ( this will put modem firmware 04.02.13_G @ 1.0.2)

    * jailbreak/activate/unlock in 1.0.2 (this will unlock modem firmware 04.02.13_G @ 1.0.2)=======> 1.1.1 then jailbreak/oktoprep (this will prep for 1.1.2 jailbreaking)

    * update to 1.1.2 then jailbreak/activate ===> you will get activated and unlocked modem (04.02.13_G) @ 1.1.2




    PLEASE READ THE WHOLE PRE_GUIDE BEFORE STARTING!!!!!!


    1.(Update to 1.1.2.) Start with connecting you iphone with any AT&T SIM in it ( not the one legally activated )to iTunes and sync , then press update , this will update your phone to 1.1.2 and you modem to (04.02.13_G) , when it is done a picture of a plug will appear on the iphone and it will tell u to slide to unlock in Gibberish, on iTunes it will tell you, that you need iTunes 7.5 or higher to activate you phone.

    2.(Downgrade to 1.0.2) While the iPhone is still connected to iTunes ,Put the iPhone in DFU mode (by pressing sleep and home button till you phone turns off and the screen turns black release only the sleep button, keep holding the home button till iTunes recognizes the phone on Restore mode).
    iTunes will offer you to restore the phone, you press Shift and Select restore, a browser window will pop up, browse where you have your 1.0.2 firmware and highlight it then click ok, and wait for it to be done.

    3.(Downgrade to 1.0.2) A. When the restore is done an error message will appear click ok, the phone will have the yellow triangle on it, Start iBrickr v0.91 it will offer you to boot the phone, click boot then go to main menu , if the screen turns green you need to redo the 1.0.2 restore, if red , wait about 40-50 seconds and the phone will restart and you will get the " Activate " screen .


    Now you have an iPhone firmware 1.0.2 with modem firmware (04.02.13_G), so take a break

    Please Register or Log in to view images



    4.(Jailbreak/activate/unlock) A. Using WiNstaller(will close iTunes automatically) and the unactivated AT&T SIM in the phone, click Activate ( This will jailbreak/Activate )and wait till its done , then you see phone activated press ok then you will see your springboard. Open appTappinstaller on you computer and chose firmware 1.0.2 then install the Installer.app ( the blue Icon in the Iphone SpringBoard you will see later) then it will restart and wait for it to go back on main springBoard.

    B. Connect to Wi-Fi and click the Blue Installer icon, and wait for it to refresh, it will tell you that it found an update, click install and after its done click the home button and wait for the iphone to do a soft reset then slide to unlock. Using the same method install Community Sources+ BSD Subsystem+ OpenSSH in that order and click the home button and wait for the soft reset after each install.

    c. Restart the phone and with change the SIM to a T-mobile SIM or any other NON-AT&T SIM, then go to settings>general>autolock>never then press home button. open FileZilla ( or winSCP) then connect to your phone ,the first try will take about a minute to connect put your IP address where it says Host : 192.168.0.100 in my case , Username: root , password :dottie and port:22 , open anySIM 1.2u rename the folder inside it to anySIM.app then copy the anySIM.app folder to /Application/ to your iPhone (I assumed you know how to work with SCP ) and set permissions on both anySIM folder and the anySIM file inside the folder on your iPhone to 755 on fileZilla ( Octal 0775 on Winscp ) then restart your phone.


    ****** if you got here congrats. you unlocked baseband (04.02.13_G)*********** so take a break

    E. Connect to iTunes and sync if you have to, so u can get to the main iPhone Screen, then press SHIFT + UPDATE not restore and browse to firmware 1.1.1 then chose and press ok, wait for it to finish , iTunes will display and error press ok then take phone off DFU mode using iBrickr, Open iBrickr and chose to boot then go to main menu , if the screen turns green you need to redo the 1.1.1 update USING SHIFT AND RESTORE not update , if red , wait about 40-50 seconds and the phone will restart and you will get the " Activate " screen .


    5. (jailbreak/Oktoprep)A. Assuming that you got the "activate" screen close iTunes and slide to unlock to the emergency keypad , dial *#307# the phone will ring then press back space to clear the numbers, then press 1 then dial, the phone will ring again, press answer the press hold , the phone will ring again press dismiss , then go to contacts, add 2 contacts, one is: name p and url prefs://1f and the other is j url http://jailbreakme.com, save them and go in contact p and click on prefs://1f, this will take to set up you Wi-Fi, make sure you are connected to Wi-Fi and press home button, this will take you to "activate" screen , slide to unlock then dial 1 the phone sill ring , answer and press hold , it will ring again then press dismiss , that will take to contacts, select contact j and press on url http://jailbreakme.com . this will open the browser to AppSnapp Webapp site just chose " Install AppSnapp" and wait about 2 minutes , the phone will restart and you have a jailbroken 1.1.1.

    B. Don’t worry if you are not getting signal on you phone , you are not suppose to on Firmware 1.1.1 .Now click the Blue Installer icon, and wait for it to refresh, it will tell you that it found an update, click install and after its done click the home button and wait for the iphone to do a soft reset then slide to unlock.

    C. Open iTunes, Sync or setup if you have to and make sure you are on the main screen with update and restore buttons available. NOW on your phone click installer ( blue icon) and install Oktoprep it is under tweaks 1.1.1. and wait for it to say it is ok Blah bLah blah , then press home button and wait for a soft reset.(( do not restart phone ))


    6.( update to 1.1.2) A. On iTunes press update . it will update you phone to 1.1.2 without errors , wait for it to finish, a picture of a plug will appear on the iphone and it will tell u to slide to unlock in Gibberish, on iTunes it will tell you, that you need iTunes 7.5 or higher to activate you phone.

    B. close iTunes and open 1.1.2_jailbreak folder and click windows.bat , java application will open, MAKE SURE YOU CHECK INSTALL SSH. if a message popped up saying " this is only for phone with oktoprep yada yada yada" you need to Restore back to 1.1.1 and start back at step number 5, if it worked just wait for it to finish, press ok then restart the phone. You will see that the phone will reboot by its self after u restart it NOW YOU HAVE A JAILBROKEN 1.1.2

    If you use the latest 1.1.2 you dont have to patch lockdownd any more , new 1.1.2 jailbreak activates too so ( no need for last step ), download it here http://conceitedsoftware.com/iphone/site/112jb.html




    C. ( only use with 1.1.2 jailbreak in pack see step above) open FileZilla ( winSCP didn’t work for me at this point ) then connect to your phone ,the first try will take about a minute to connect put your IP address where it says Host : 192.168.0.100 in my case , Username: root , password :alpine and port:22 ,on you computer open the lockdownd 1_1_2. On you phone go to /usr/libexec/ and rename the lockdownd file in /usr/libexec to lockdownd.bak the copy the lockdownd file from loackdownd 1_1_2 to /user/libexec on your phone and set permissions on it to 755 on fileZilla ( Octal 0775 on Winscp ) then restart your phone.

    ########## Congrats you have an unlocked iPhone with Firmware 1.1.2 #########
  3. edisonho1990

    edisonho1990 New Member

    Joined:
    Oct 27, 2007
    Messages:
    140
    Likes Received:
    0
    thanks alot man i'll try to do this!
  4. moomood256

    moomood256 New Member

    Joined:
    Nov 16, 2007
    Messages:
    74
    Likes Received:
    0
    does this work for iPhones that came with 1.1.2?
  5. moomood256

    moomood256 New Member

    Joined:
    Nov 16, 2007
    Messages:
    74
    Likes Received:
    0
    So this doesn't work on 1.1.2 how do you know for sure which it comes with after it has been downgraded and updated
  6. ojx

    ojx Member

    Joined:
    Sep 27, 2007
    Messages:
    506
    Likes Received:
    0
    Device:
    iPhone 6 Plus
    no it doesn't work on phones that came with 1.1.2 out of the box. check the serial #. if the 4th and 5th #'s are 45 and up it's most likely a 1.1.2

Share This Page