Ipod touch 1g case?

Discussion in 'Accessories' started by Judas5435, Nov 23, 2008.

  1. Judas5435

    Judas5435 Member

    Joined:
    Nov 9, 2007
    Messages:
    52
    Likes Received:
    0
    Does the BSE (Bestskinsever)site for 2G Ipod touch work with a 1g ipod touch



    or would it not be compatible
  2. christoph7577

    christoph7577 New Member

    Joined:
    Jan 28, 2008
    Messages:
    15
    Likes Received:
    0
    Hello, this is Chris from ZAGG. There are 2 designs for the original invisibleSHIELD. Because of the differences in design of the iPod touch, the film has to be cut differently. I don't know about BestSkinsEver, but that's how the invisibleSHIELD works.
  3. Flipzter

    Flipzter Member

    Joined:
    Dec 20, 2007
    Messages:
    582
    Likes Received:
    0
    Device:
    iPhone 3G (Black)
    I like the skins from www.decalgirl.com So many different graphics to choose from. Plus you can even do a custom graphic if you like.
  4. Jarlath

    Jarlath Retired Moderator

    Joined:
    Mar 21, 2008
    Messages:
    2,321
    Likes Received:
    0
    The short answer: it might fit, but it won't fit well due to the difference in the shape of the back of the Touch 2G versus the 1g (it tapers off at the edges and curves in the middle, versus the rather flat back of the Touch 1G.

    You'd be better off buying a skin which says it's for the 1G, as that way it'd fit - DecalGirl, Gelaskins, or the InvisibleShields (which I can find in retail stores now), if not the BSE.

Share This Page