invisible shield

Discussion in 'Accessories' started by demar, Oct 8, 2007.

  1. demar

    demar New Member

    Joined:
    Sep 20, 2007
    Messages:
    17
    Likes Received:
    0
    hi have any body test the invisible shield for ipod toch?

    is it good?
    can i remove it from the ipod touch when i ones put it on?
  2. vadimqwe

    vadimqwe New Member

    Joined:
    Sep 28, 2007
    Messages:
    238
    Likes Received:
    0
    Device:
    iPod touch
    yeah its good, i had it on my ipod video and im ordering one for my touch. Make sure you buy it from invisible shield not cheap crap on ebay
  3. digdug

    digdug New Member

    Joined:
    Sep 20, 2007
    Messages:
    78
    Likes Received:
    0
    Don't bother with the full body version. The material isn't uniformly clear enough (for vision) or smooth enough (for touch) to use as on the beautiful crystal front of the iPod Touch of the iPhone.

    I ended up using it only the back, which it is perfect for.
  4. RadicalxEdward

    RadicalxEdward New Member

    Joined:
    Sep 17, 2007
    Messages:
    135
    Likes Received:
    0
    I'll be posting a full review in a few days. a couple of tips tough. Cover your ipod with clear tape now before it gets scratched until you get the shield.

    most likely you will only want to put the back on, the front is better with just the glass. Make sure you don't waste too much fluid on one side over the other as there isn't a lot. but the fluid is what helps get bubbles and such out.
  5. RadicalxEdward

    RadicalxEdward New Member

    Joined:
    Sep 17, 2007
    Messages:
    135
    Likes Received:
    0
    and yes it's easy enough to remove down the line. but do let it set for 24 hours!
  6. demar

    demar New Member

    Joined:
    Sep 20, 2007
    Messages:
    17
    Likes Received:
    0
    okej you think i am going to have the sids and the back shild on but not the front?

    its not goning to be any marks on the ipod touch when i remove it then?
  7. RadicalxEdward

    RadicalxEdward New Member

    Joined:
    Sep 17, 2007
    Messages:
    135
    Likes Received:
    0
    There won't be any marks (if your careful about how you get the first edge up a little ie. don't use a razor blade or something.) just an fyi it comes with a front, a button (for home button) and a back. the back covers the mirror finish back and sides and the front covers the glass and the black metal edge.
  8. demar

    demar New Member

    Joined:
    Sep 20, 2007
    Messages:
    17
    Likes Received:
    0
    yes i am whit you... i dont put the front on then. I whas a lite sceptikal to the front in the start
  9. Khris

    Khris New Member

    Joined:
    Sep 18, 2007
    Messages:
    49
    Likes Received:
    0
    You can use plain water.
  10. RadicalxEdward

    RadicalxEdward New Member

    Joined:
    Sep 17, 2007
    Messages:
    135
    Likes Received:
    0
    Wasn't sure if i wanted to take that risk. there are generally fluids that are non conductive shipped with things like this. i wouldn't want to short out my ipod cause water got it. but thanks for the tip.

Share This Page