[HOW TO] PWN Your iPhone/iPod Touch (MAC ONLY)

Discussion in 'Pwnage and Winpwn Discussions' started by Khaos, Apr 7, 2008.

  1. Khaos

    Khaos Well-Known Member

    Joined:
    Dec 31, 2007
    Messages:
    1,655
    Likes Received:
    127
    Device:
    iPhone 4 (Black)
    I am in no way responsible of anything happens to your iPhone/iPod Touch, such as bricking

    Look At This Before Pwning Your iPhone/iPod Touch

    Please Register or Log in to view images


    Credit For The Chart: Teslanaut

    Click On The Pictures To See Them Bigger


    Pwnage (Mac Only)
    1. Download Pwnage Here: http://ipp.iphwn.org/PwnageTool_1.0.zip
    2. Download The 1.1.4 Firmware:
    iPod Touch: Here
    iPhone: Here
    and save it somewhere
    3. Restore your iPhone/iPod Touch normally (no restore mode or DFU mode) (Just click restore and update)(You have to be 1.1.4)
    4. Put your iPhone/iPod Touch in DFU mode:

    [HOW TO] Put iPhone/iPod Touch In DFU mode
    1. Make sure your iPhone/iPod Touch is turned on and connected to iTunes
    2. Hold the power and home button down at the same time till it turns off
    3. As soon (like once you see) the iPhone/iPod Touch disappears (disconnects) from iTunes, let go of the power button but continue to hold the Home button
    4. Wait till iTunes says "Your iPod is in recovery mode and has to be restored", if you look at your iPhone/iPod Touch the screen will be black...This is normal and your iPhone/iPod Touch is in DFU mode

    If That Does Not Work, Do This:
    1. Download iLiberty + For mac at http://www.ipluspwns.com
    2. Install and open it, at the top toolbar you will see advanced, click that then click DFU Mode

    Back To Pwnage:
    1. Now that you are in DFU Mode Restore Your iPhone/iPod Touch to 1.1.4 again
    2. Close Everything you have opened, including this web-browser (Just remember this guide or write it on a piece of paper)
    3. Open Pwnage Tool

    Please Register or Log in to view images



    4. Put your iPhone/iPod Touch in restore mode:

    [HOW TO] Put iPhone/iPod Touch In Restore Mode:
    1. Hold Power and Home button till it shuts off
    2. Let go of both
    3. Hold both of them down again till it turns on, when it does (You see the apple) Let go of the power button but continue to hold down the home button till you get the Connect To iTunes screen

    If That Does Not Work, Try This:
    1. Download iLiberty + For mac at http://www.ipluspwns.com
    2. Install and open it, at the top toolbar you will see advanced, click that then click Restore Mode

    Back To Pwnage AGAIN:
    1. You should have pwnage tool still open, hit Browse .ipsw

    Please Register or Log in to view images


    2. For iPod Touch Users Open: iPod1,1_1.1.4_4A102_Restore.ipsw file and click Open.
    For iPhone Users Open: iPhone1,1_1.1.4_4A102_Restore.ipsw file and click Open.
    IT HAS TO END IT .ipsw AND BE 1.1.4, IF IT IS NOT DONT CLICK IT!!!

    Please Register or Log in to view images



    It Should Look Like This:

    Please Register or Log in to view images


    3. Make sure your iPhone/iPod Touch is in restore mode, plugged in and recognized by the computer (In iTunes i recommend un-checking the part that says "Open iTunes When This iPhone/iPod Touch Is Connected")
    4. Click iPwner and let it do its thing (DONT TOUCH ANYTHING WHILE IT DOES IT!!!)

    Please Register or Log in to view images



    Please Register or Log in to view images



    5. When its done it should boot up normally with a pineapple and you should see slide to unlock, if you get the Pwned Screen, thats ok too.

    Please Register or Log in to view images



    6. Now to create the Custom .ipsw, click IPSW Builder
    7. Choose What You want, iPod Touch users only click: Use Custom Pictures, This also is a jailbreak.

    Please Register or Log in to view images



    Heres a definition of all of them:

    Enable baseband update - Determines if the baseband update should be enabled in the custom ipsw. Only check this button if you wish to update the baseband modem portion of your iPhone. Warming! This may remove previous baseband unlocks or other modifications that have been previously made. If in doubt leave it unchecked.

    Neuter bootloader - This will enable "Bootneutering" to the baseband firmware allowing custom firmware to be installed onto the iPhone baseband by convincing the iPhone that it is secure. Arbitrary secpacks and fls files will be accepted when the device is in this state. More info about bootneuter.

    Under the BootNeuter checkbox will present two new options that are selectable these are -

    Upgrade to 4.6 NB: Unless you understand this option you should avoid it.

    Downgrade to 3.9 NB:
    Unless you understand this option you should avoid it.

    Unlock baseband - This will enable the unlocking of the baseband to all networks using a custom "software unlock" process. This should be used if you plan to use a SIM card from a carrier other than the one provided by your original iPhone carrier.

    Activate Phone
    - This will activate the phone so that it can be used with iTunes. This will bypass the Apple activation process and set the iPhone to be in an Activated state allowing access to the device's functions.

    Use Custom Pictures - This option enables the use of custom iPhone graphics to replace the stock images that are used when the phone boots or goes into recovery mode.

    Please Register or Log in to view images



    8. Save it to the spot you want, if it asks for the bootloader files, follow this guide (iPhone Only):

    How To Get Bootloader Files (iPhone Only)
    I am not directly linking it, you will have to do it this way
    1. Go Here: http://gizmodo.com/375493/pwnage-iphone-unlocking-and-hacking-tool-now-available-works-great
    2. Hit Command + F
    3. Type bootloaders and hit find twice, you should next to a link that says [[PIRACY.rs].com] Click that

    Alternative:

    1. Go Here: http://gizmodo.com/375493/pwnage-iphone-unlocking-and-hacking-tool-now-available-works-great
    2. Scroll down till you see a post that on the blue bar says:
    and the post should say
    Click that

    To open the .rar file:
    In Windows, you need WinRAR
    In Mac OS X, you need "The Unarchiver"

    In there will be the 3.9 and 4.6 bootloader files, extract them somewhere

    Back On Pwnage FINAL
    9. If it asks for username and pass, go ahead and enter it
    10. Open iTunes and put your iPhone/iPod Touch in restore mode again
    11. Hold the option key and click restore, find the custom firmware and let it restore

    ALL DONE

    Bootneuter Guide: http://wikee.iphwn.org/sgold_bootrom:bootneuter

    Wifi Fix (iPhone Only): http://wikee.iphwn.org/news:wififix_announcement

    Remember Rep Is Always Appriciated
    5 people like this.
  2. poetofsound

    poetofsound New Member

    Joined:
    Nov 24, 2007
    Messages:
    86
    Likes Received:
    0
    This is GREAT! It will help A LOT of noobs who don't understand. Great work!
  3. Khaos

    Khaos Well-Known Member

    Joined:
    Dec 31, 2007
    Messages:
    1,655
    Likes Received:
    127
    Device:
    iPhone 4 (Black)
    thx, i guess this was good that i did it then
  4. Teslanaut

    Teslanaut Well-Known Member

    Joined:
    Sep 16, 2007
    Messages:
    15,588
    Likes Received:
    177
    Device:
    4G iPod touch
    It'll never stop the noobs.

    Nothing will stop the Noobs.
  5. x6blues

    x6blues New Member

    Joined:
    Dec 13, 2007
    Messages:
    2,879
    Likes Received:
    113
    Great guide khaos. This was very well-written/informative...

    *cough sticky cough*
  6. Teslanaut

    Teslanaut Well-Known Member

    Joined:
    Sep 16, 2007
    Messages:
    15,588
    Likes Received:
    177
    Device:
    4G iPod touch
    Khaos, are you actaully allowed to distribute/link to the Bootloader files?
  7. x6blues

    x6blues New Member

    Joined:
    Dec 13, 2007
    Messages:
    2,879
    Likes Received:
    113
    Probably not since it is the property of Apple. So khaos, you should just provide a link to a website where the files are, there was something like that on a wiki page I was at earlier..
  8. Khaos

    Khaos Well-Known Member

    Joined:
    Dec 31, 2007
    Messages:
    1,655
    Likes Received:
    127
    Device:
    iPhone 4 (Black)
    well does it actually ask for bootloader files, i don't own a mac but i heard after looking through the forums you needed it... is this true? o and i removed the link
  9. Khaos

    Khaos Well-Known Member

    Joined:
    Dec 31, 2007
    Messages:
    1,655
    Likes Received:
    127
    Device:
    iPhone 4 (Black)
    Update: I followed what you said, i put a indirect link and guide on how to get the direct download link
  10. hiflyer

    hiflyer Guest

    The Bootloader files are only required for the Iphone, not the Ipod.

Share This Page