How to Customize your iPhone/iPod Touch’s firmware using PwnageTool (MAC) …. adding apps, Library, documents ecc… REMEMBER TO BECKUP YOUR INSTALLER SOURCES (that are on /private/var/mobile/Library/Installer) I’m Italian so if you find grammatical errors please post/report it! We are going to create a real customize firm : Note! This Tool will help people who don’t wont change firm version just for don’t lose all the apps Or for the one who would like to change the boot logo, but just for this don’t wont to unlock another time (and download) their device! Once you’ve load the selected firmware, enter in the “IPSW Builder” selection: Please Register or Log in to view images Do not change anything (or just the recovery and boot logo) and clik on “ok” PwnTool will start to work unzipping the original firmware: Please Register or Log in to view images wait less then 2 minute, just before ending will ask you to authenticate (insert a user name a password) Please Register or Log in to view images rigth now you’ll easly see an disk immage on your desktop Please Register or Log in to view images Do no insert the password (or just do not clik on “ok”) but double clik on LittleBear4A102.N45Bundle…. Inside you will recognize the loaded firmware (as you had know on MobileFinder o CyberDuck). So now it will be easy to drag and drop everything you want (that as previously download from your old firmware (not jus apps but also settings pictures, photos, themes…So everything!) Please Register or Log in to view images Pleased, at least put on your data (user name and password): Please Register or Log in to view images Have fun! Remember! If you have not Powned ( “iPwner” button) your device, Do it! Open iTunes and clik on Refresh (olding the “alt” button) choose your new firmware and load it!. ATTENTION!!! Restoring your l’iPhone/iPod you’ii have problem like freezing! Please Register or Log in to view images the end!