Hopefully someone can help.

Discussion in 'iPod touch' started by thejester, Mar 1, 2009.

  1. thejester

    thejester New Member

    Joined:
    Feb 28, 2009
    Messages:
    108
    Likes Received:
    0
    Device:
    2G iPod touch
    So while jailbreaking my ipod Touch 2G with Cyw00d, all was fine and dandy until I got to step 5 in the GUI. I don't know what I did, but I got to the part where the Touch becomes non responsive (apparently this is supposed to happen) and the "USB not recognized" thing pops up. So after seeing this happen to the person in the video I was watching, and then he just put it into DFU and everything worked out, I thought the same would work for me. So when I got to step 5, I tried putting it into DFU, but the connected/disconnected chime didn't sound, and it still said device not recognized. So basically, it's stuck as non responsive, USB isn't recognized so I can't restore, and DFU isn't working for me... So does anyone know what I can do?
  2. stickman1000000

    stickman1000000 New Member

    Joined:
    Feb 1, 2009
    Messages:
    166
    Likes Received:
    0
    Device:
    2G iPod touch
    keep trying to put in dfu mode it will work eventually

    hold home and power for 1o seconds then hold home until it works
  3. Dangerous2000watts

    Dangerous2000watts New Member

    Joined:
    Feb 8, 2009
    Messages:
    2
    Likes Received:
    0
    It's really tricky but you will figure it out
  4. utongrag

    utongrag New Member

    Joined:
    Mar 1, 2009
    Messages:
    5
    Likes Received:
    0
    heya mate
    i had the same problem about 5 minutes ago...
    all i did was unplug it hold the power button for about 5 seconds
    ( yes i know it doesnt turn on! )
    and then plug back in and then follow instructions and make sure iTunes is closed.... and then put in DFU mode, it should work

Share This Page