Help with Semti-Tethered?

Discussion in 'iPod touch 2G Jailbreak: redsn0w, 24kpwn, etc.' started by Kidfork, Feb 16, 2009.

  1. Kidfork

    Kidfork Member

    Joined:
    Feb 1, 2009
    Messages:
    65
    Likes Received:
    0
    Device:
    iPhone 4 (Black)
    So i have been trying to Jailbrake Using Semi-tethered But every time i try to boot it i get stuck at the iTunes USB logo. It wont boot into jailbroken mode, neither normal mode. Heres the output of:
    Code:
    iRecovery -s
    setenv boot-path /System/Library/Caches/com.apple.kernelcaches/kernelcache.s5l8720p
    fsboot
    go
    /exit
    Code:
    C:\Users\Tyler\Desktop\jailbreak\iRecovery\iRecove ry_SVN>iRecovery -s
    iRecovery - Recovery Utility
    by wEsTbAeR-- and Tom3q
    
    Got USB
    
    
    =======================================
    ::
    :: iBoot for n72ap, Copyright 2008, Apple Inc.
    ::
    :: BUILD_TAG: iBoot-385.49
    ::
    :: BUILD_STYLE: RELEASE
    ::
    :: USB_SERIAL_NUMBER: CPID:8720 CPRV:10 CPFM:03 SCEP:02 BDID:00 ECID:000001
    C83C040D2F SRNM:[1A839HHF201]
    ::
    =======================================
    
    [FTL:MSG] Apple NAND Driver (AND) RO
    [FIL:INF] Found chip id 0x3ed5d789 on CS 0.
    [FIL:INF] Found chip id 0x3ed5d789 on CS 1.
    [FTL:MSG] FIL_Init [OK]
    [FTL:MSG] BUF_Init [OK]
    [FTL:MSG] FPart Init [OK]
    read new style signature 0x43313132 (line:290)
    [FTL:MSG] VSVFL Register [OK]
    [FTL:MSG] VFL Init [OK]
    [FTL:MSG] VFL_Open [OK]
    [FTL:MSG] YAFTL Register [OK]
    [FTL:MSG] FTL_Open [OK]
    Boot Failure Count: 0 Panic Fail Count: 0
    Delaying boot for 0 seconds. Hit enter to break into the command prompt...
    HFSInitPartition: 0xff33730
    Kernelcache image not valid
    Entering recovery mode, starting command prompt
    (Recovery) iPhone$ setenv boot-path /System/Library/Caches/com.apple.kernelcach
    es/kernelcache.s5l8720p
    (Recovery) iPhone$ fsboot
    HFSInitPartition: 0xff88398
    (Recovery) iPhone$ go
    Memory image not valid
    (Recovery) iPhone$ /exit
    Notice 2 Things,
    Code:
    Memory image not valid
    Code:
    Kernelcache image not valid

    So how can i get a Kernalcache image "VALID" and Memory?

Share This Page