Hangup Doesnt Work

Discussion in 'iPod touch VoIP and Telephony' started by TakeAimAtSin, Jan 21, 2008.

  1. TakeAimAtSin

    TakeAimAtSin Member

    Joined:
    Nov 1, 2007
    Messages:
    168
    Likes Received:
    1
    I am using the cleaned up version. And the hangup button wont work.
  2. Andy Huang

    Andy Huang Retired Moderator

    Joined:
    Oct 5, 2007
    Messages:
    968
    Likes Received:
    5
    Device:
    iPhone 4 (Black)
    That means your SIP VoIP application isn't actually connected to the server. The image is swapped with connected, and you're allowed to use the buttons, but in reality, you're likely having DNS routing issue or alike, which makes it so that your app is semi-locked up. Hit home button, restart the app, and then check your configurations again.
  3. derdj

    derdj New Member

    Joined:
    Oct 19, 2007
    Messages:
    41
    Likes Received:
    0
    Device:
    iPhone 3G (White)
    mines doing the same thing... never happened before on the old one. BTW, do you need to set the reg. timeout or STUN stuff?
  4. Andy Huang

    Andy Huang Retired Moderator

    Joined:
    Oct 5, 2007
    Messages:
    968
    Likes Received:
    5
    Device:
    iPhone 4 (Black)
    reg timeout leave at default: 1800
    STUN stuff is not activated yet (you need to tap the NAT button, then tap into the STUN stuff to set it), just leave them default or ignore the fileds if you've changed it.

Share This Page