[GUIDE] RUN RS - NOR only - FIX for Error 6! [WINDOWS] Way to fix error 6 when flashing the NOR for run rs. You need to be in a certain recovery mode to let the run rs noronly firmware work so we do this by putting your iPod into the state just before its about to be restored. This gets around error 6 and lets you upgrade to the run rs boot without fully restoring Please Register or Log in to view images FOR SIMPLE INSTRUCTIONS SKIP TO THE BOTTOM OF THE PAGE ALSO IF YOU DO ANYTHING WRONG AND YOUR iPOD WILL ONLY BOOT INTO RECOVERY MODE (iTUNES LOGO) THEN THERE IS A FIX NEAR THE BOTTOM OF THE PAGE You must already be jailbroken with tethered NOT SEMI-TETHERED This will not remove your main file system it's just an upgrade to the run rs way of booting (means you won't lose your apps or settings Please Register or Log in to view images) This will not give you custom logo's its just a guide on how to get past error six if your trying to restore to a run_rs NOR only ipsw You will need: Custom run rs NOR only ipsw email nate123 for it at firstname.lastname@example.org 2.2.1 Custom Tethered Jailbreak ipsw from when you first jailbroke your iPod iRecovery and LibUSB along with the Microsoft C++ package How To Get Past Error 6 1. Put iPod in DFU mode 2. Using cmd prompt type (HINT- you can find this by right clicking on your iRecovery program and under location you can copy and paste into cmd prompt) 3. Type 3. Unplug your iPod and plug it back in you should now have a white screen 4. Copy and paste ONE line at a time (can do all mx 0x9 cmd's together) 5. Type 6. Type 7. Type 8. Type 9. LEAVE CMD PROMPT OPEN!!! 10. Put your iPod and DFU mode and boot (either with booter or manually) 11. Now at the slide to unlock screen open up iTunes 14. DO THIS EXACTLY Open up task manager and have it ready Browse for your tethered jailbreak firmware (the one you used in your original jailbreak) and restore with that WATCH YOUR iPOD When it powers off use task manager to quit iTunes (end task) 15. Put iPod in DFU mode 16. Boot your iPod (either with booter or manually) it will boot into recovery mode (iTunes logo) 17. Now shift-restore your with custom run rs.ipsw 18. Once its done your iPod will boot into recovery mode (iTunes logo) If not put into DFU and boot normally 19. Once your at the recovery mode screen Type (in the cmd prompt you didn't close, remember?) 20. Copy and paste ONE block at the time 21. Then type 22. Then type Your iPod will now be booting!!! Enjoy A boot tool will come with Nates ipsw if not, you can find them on these forums or you can do it manually cd into irecovery then type Credit to Nate123 - for the ipsw johnnyfranks67 - for find out how to get past error 6 iPod only boots into Recovery mode fix 1. Put your iPod in recovery mode (iTunes logo) 2. cd into iRecovery and type then (you can do this all at once) 3. Then put your iPod in DFU and boot Simple Instructions To get past Error 6 Run the redsnn0w exploit (steps 1-8) Boot your iPod so that you are on the slide to unlock screen. Restore your iPod with your custom 2.2.1 normal tethered firmware Just as your iPod turns off use Task Manager to force quit iTunes Boot your iPod with a booter it will be in recovery mode Flash the NOR with your custom run rs.ipsw Run the setenv codes (steps 20-22) Enjoy!