can some one tell me the steps on how to use winpwn?

Discussion in 'iPod touch Firmware 2.X Jailbreak' started by idiotman35, Jul 20, 2008.

  1. idiotman35

    idiotman35 New Member

    Joined:
    Jul 17, 2008
    Messages:
    31
    Likes Received:
    0
    yeah i dont understand winpwn
  2. kridix

    kridix Member

    Joined:
    Jan 17, 2008
    Messages:
    245
    Likes Received:
    2
    Device:
    iPod touch
    Here's a tutorial that jchaike made.

    WinPWN
  3. mlbplayer456

    mlbplayer456 Banned

    Joined:
    Nov 11, 2007
    Messages:
    978
    Likes Received:
    6
    WinPwn is a windown application which lets your ipod touch or iphone run unsigned code. By unsigned code i mean, winpwn modifies the firmware you choose to run applications and the installer right on it so you can restore to a firmware you make and all the apps you selected to be on there will be there.

    Please Register or Log in to view images


    this is what it will look like when you open it (have your ipod connected with 1.1.4 on it and its must be jailbroken) and then you have to select the 1.1.4 firmware on your computer then create a custom firmware.

    Please Register or Log in to view images


    This is the interface where you build a custom firmware out of 1.1.4
    1.press the plus in the categories and double click an app you want in the firmware
    2.these are the sources, you can add more, they will refresh in the beginning in about 2 minutes.
    3.once done (after the picture below) click build .ipsw and it will take about 5 minutes to build.


    Please Register or Log in to view images


    this is where you can set different boot logos and restore logos in the firmware.
    1. check this box if you want custom ones
    2. click this to look at different logos or keep the default on displayed
    3. same as two except its the restore logo

    Now your ipod cant run this firmware unless you "pwn" it:::::


    Please Register or Log in to view images


    1. click this when your ipod is plugged in (jailbroken or not) and close itunes. then it will take a a little bit. if it says to put in to recovery mode then do this:
    unplug your ipod from your computer. then turn it off (slide to power off) then hold down the home button and plug it in and it will be in recovery mode. once done pwning go in to itnues hold down shift and restore to your custom firmware


    that's for 2.0

    Attached Files:

  4. Jikoo

    Jikoo New Member

    Joined:
    Apr 5, 2008
    Messages:
    1,014
    Likes Received:
    0
    winpwn don't work on 2.0 well that's what makes sense
  5. iTouch532

    iTouch532 Well-Known Member

    Joined:
    Dec 10, 2007
    Messages:
    2,710
    Likes Received:
    30
    Device:
    iPod touch
    it does work with beta 2.0
  6. jchaike

    jchaike Active Member

    Joined:
    Dec 26, 2007
    Messages:
    1,260
    Likes Received:
    3
    Device:
    iPhone 4 (Black)
    my tutorial is super simple: follow it =D
  7. potroast32

    potroast32 Banned

    Joined:
    Feb 19, 2008
    Messages:
    959
    Likes Received:
    0
    Mlbplayer explained it perfectly. Also... There is a winpwn/pwnage section

Share This Page