automated jailbreak for IPOT 1.1.2

Discussion in 'iPod touch 1.1.x Jailbreak' started by rodrigo, Nov 14, 2007.

  1. rodrigo

    rodrigo New Member

    Joined:
    Oct 1, 2007
    Messages:
    15
    Likes Received:
    0
    Hello everyone.
    i have sreached but have not found it so.
    still i wounder when a automated Jailbreak will come up to 1.1.2 as the one i used for 1.1.1.
    or do you recomend the other way to use 1.1.1 and jailbreak it there and then uppdate to 1.1.2 as other threads write aobut here.

    thanks in advanced rodrigo.
  2. kinematic@yahoo.com

    kinematic@yahoo.com New Member

    Joined:
    Oct 14, 2007
    Messages:
    172
    Likes Received:
    0
    There's none that I know of yet. Because the jailbreak isn't really a 1.1.2 jailbreak, it's more of a hack or backdoor via 1.1.1, it makes it a little more trickier to automate it. I'm sure someone will come up with a way.

    So far the best tutorial I came across is the readme from this site: http://conceitedsoftware.com/iphone/site/112jb.html

    Download it and you'll see the readme on it.

    1.1.2 Jailbreak

    **** NOTE: This method currently requires you be on 1.1.1 of the firmware. If you are on 1.1.2
    you must downgrade prior to being able to use this jailbreak. ****

    **** NOTE: PLEASE NOTE THIS METHOD ONLY WORKS ON ITUNES ACTIVATED PHONES OR IPOD TOUCHES ****


    Step 1: Downgrade to 1.1.1 (if required)
    *** NOTE: This guide does not guarantee it will work 100%. Also errors 1015 is expected at
    the end of the process. Continue reading to understand. ***

    1. Download the 1.1.1 ipsw firmware file from Apple. If the downloaded file has the extension
    ".zip", please remove it and modify it to end up with a filename ending in _Restore.ipsw

    2. Reboot your iPhone holding the top (power) and home buttons BUT release the top button 10
    seconds into it (right after the screen goes dark) and continue to hold the home button until
    iTunes detects the phone in recovery mode. The iPhone screen will appear to be off, but start
    iTunes if not started yet .

    3. Restore your iPhone by pressing and holding the ‘Shift’ key on windows or ‘option’ key on Mac,
    then click ‘restore’ to select the 1.1.1 firmware file you downloaded earlier. The restore should
    go through and errors at the end with error 1015. However you will notice that the iphone is in
    DFU mode with the connect to itunes screen from 1.1.1.

    4. In order to kick the phone out of that mode I just had to launch iNdependence version 1.2.5
    and wait a minute or so. If you are using iTunes 7.5 you will have to get a MobileDevice from a
    previousv version in order to run Independence.

    ----------------------------------------------------------------------------------------------------

    Step 2a: Jailbreak 1.1.1 on Unactivated iPhone
    *** NOTE: If your phone has been activated through iTunes, you can proceed to step 2b. ***

    1. enter *#307# press call, now use the back button on the top of your screen to remove *#307# ,
    now enter 0 , press call, press answer, press hold, press decline. And you get to the contact
    list. And thereafter every time you push the homebutton you just slide the "emergency call"
    slide, then enter 0 , press call, press hold, press decline.

    2. Push contacts, end call and you get called again, this time hit decline and you access one of
    menus with favorites, you can edit contacts, do a test ride on keyboard, take photos etc.

    3. Now edit a new contact and type in "prefs://11" as web-address and "http://jailbreakme.com" as
    an additional URL.

    4. When you tap "prefs://11" you can now select your favorite WiFi gateway.

    5. Now press the home button and move the slider to the dial-pad.

    6. Now you can go back to the contact list by Dialing 0, push call, then answer, then contacts,
    then hit the "http://jailbreakme.com" web address you typed in.

    7. Scroll down to the bottom, click "Install AppSnapp". Safari will exit and you'll return to your
    springboard. Wait for the phone to reboot. You are now jailbroken. and are able to use
    Installer.app.

    ----------------------------------------------------------------------------------------------------

    Step 2b: Jailbreaking on iPod Touch or iTunes Activated iPhone

    1. Launch Safari

    2. Visit http://jailbreakme.com, Scroll down to the bottom, click "Install AppSnapp". Safari will
    exit and you'll return to your springboard. Slide to unlock, you are now jailbroken. and are
    able to use Installer.app.

    ----------------------------------------------------------------------------------------------------

    Step 3: Prepare your 1.1.1 device for the Update

    1. Launch Installer.app

    2. Scroll down to Tweaks (1.1.1)

    3. Select OktoPrep

    4. Click Install

    ----------------------------------------------------------------------------------------------------

    Step 4: Update to 1.1.2

    1. Connect your device to your computer

    2. Launch iTunes

    3. Choose your device

    4. Click Update

    5. Wait forever for your device to update

    ----------------------------------------------------------------------------------------------------

    Step 5: Jailbreak your iPod Touch or iTunes activated iPhone

    1. Close iTunes

    2. Connect your device to your computer

    3. On Windows, double click on windows.bat, on Mac, double click on osx

    4. Follow the on screen instructions.

Share This Page