After Jailbreaking 16Gig , I have 19MB Free Space

Discussion in 'iPod touch' started by blacksea, Jan 29, 2008.

  1. blacksea

    blacksea New Member

    Joined:
    Jan 19, 2008
    Messages:
    2
    Likes Received:
    0
    Hi, After Jail breaking my Brand New 16 Gig Ipod to 1.1.1 and conecting to PC, Itune shows i Have a total of 256Mb Capacity, (( Free Space 19.3, Other 245.8 Mb))I have No Music or videos, any help would be apreciated,
  2. GarnetNGold

    GarnetNGold Active Member

    Joined:
    Dec 26, 2007
    Messages:
    1,846
    Likes Received:
    17
    Device:
    iPhone 4S (Black)
    Restore the iPod Touch.
  3. cTTbLaKeMAn

    cTTbLaKeMAn New Member

    Joined:
    Jan 3, 2008
    Messages:
    43
    Likes Received:
    0
    id restore it, something is wrong with the partition or format of the storage. Restore, and then re-do your Jailbreak, but try using this method, it worked for me:

    JAILBREAK 1.1.2 EASY STEPS:- (WIFI REQUIRED)

    1) DOWNGRADE TO 1.1.1
    2) Click on the link below to download 1.1.1 firmware.
    http://appldnld.apple.com.edgesuite...70927.p23dD/iPod1,1_1.1.1_3A110a_Restore.ipsw

    3) Once the download is finished connect your iPod Touch to PC and Open iTunes.
    4) Click on your iPod touch in iTunes.
    5) Hold SHIFT key and click "Check for Update"
    6) Locate the file you have downloaded on your hard disk and open it.
    7) Automatically, it will restart your iPod Touch and restore it to version 1.1.1

    Now Jailbreak your iPod Touch.

    1) Go to Safari and Open jailbreakme.com (On your iPod Touch)
    2) Scroll down and click Install AppSnapp
    3) Safari will exit automatically and it will download the "installer" on your iPod.
    4) Slide to unlock, you are now jailbroken
    4) You can see the "installer" application on your iPod Touch.

    5) Click on "installer"
    6) Click on Install (at the bottom)
    7) Go to Tweaks 1.1.1
    8) Click on oktoPrep and install it.
    9) Exit the installer.

    Now Update your iPod Touch to 1.1.2

    1) Connect your iPod Touch to your PC and open iTunes.
    2) In iTunes click on your iPod Touch and click check for updates.
    3) It will install the new firmware to your iPod Touch.
    4) After installation finishes, your iPod Touch will restart.
    5) Your firmware is now updated you can check it in Settings - General - About

    Now Jailbreak your iPod Touch

    1) Exit iTunes
    2) Open Task Manager (Right click on taskbar then click Task Manager)
    3) Close all the processes using iTunes (iTunes Helper, AppleMobileDeviceService, iPodervice)
    4) Exit Task Manager
    5) Connect your iPod Touch to your computer
    6) Download this Jailbreak file- http://[PIRACY.rs].com/files/71070651/1.1.2_Jailbreak.rar
    7) Open the downloaded folder Jailbreak 1.1.2
    8) Double click on windows.bat(If you are using Windows), Double click on jailbreak.jar(If you are using MAC)
    9) Follow the on screen instructions.
    10) Make sure you tick the box to enable SSH, as this gives you the ability to install your own apps or files later.

    Jailbreak it and watch it do its thing. It should take 10 to 15 minutes. When it's done, your iPod will reboot, and you'll have SSH and the Installer.app on your springboard again, and from there you can have fun with tons of apps that are pre-bundled.

Share This Page